2.4.3 Configure the settings relating to alteration detection
[Alteration detection]
Selecting alteration detection enables detection using exclusive software when the data on the SD memory
card is altered.
Alteration detection supports video files (MP4 format) only.
Refer to page 86 for information on how to configure alteration detection.
For further information about exclusive software for alteration detection and how to use it, refer to our website
below.
http://security.panasonic.com/support/info/
Note
• When Alteration detection is used, a stream setting must be selected for “Recording stream 1”, and
“Off” must be selected for “Recording stream 2”.
[Select certificate]
Select the certificate to be used with HTTPS.
Pre-installed: Selects a pre-installed certificate.
CA: Selects a “CA Certificate”. Only displayed when the “CA Certificate” is installed.
Default: Pre-installed
[Additional info for detecting alteration]
Select whether or not to give information for alteration detection to video files (MP4 format) to be saved on the
SD memory card.
Note
• When the certificate (CA certificate) issued by CA (Certificate Authority) is not valid, “On” cannot be
selected.
Operating Instructions 85
2 Settings
To Next Page
Loading...
