2.4.2 Configure the settings relating to the SD memory card [SD
memory card]
Click the [SD memory card] tab on the “Basic” page. (®For menu display and how to operate, refer to
page 47, page 48)
The settings relating to the SD memory card can be configured on this page.
Operating mode
[SD memory card]
Select “Use” or “Not use” to determine whether or not to use the SD memory card.
• Default: Use
Note
• When “2 mega pixel [16:9](60fps mode)” or “1.3 mega pixel [16:9](60fps mode)” is selected for “Image
capture mode”, functions related to SD memory cards are not available. “Not use” will be selected for
“SD memory card”.
78 Operating Instructions
2 Settings
To Next Page
Loading...
