• Even if this setting is changed, transmitted image data and data saved on the SD memory card are not
changed.
[Audio out]
Set the Audio/Monitor output format.
Audio/Monitor
• Default: Audio
Note
• When “Audio out” is set to “Audio”, “Monitor out” cannot be selected.
• When “Audio transmission mode” is set to anything other than “Off” or “Mic input”, “Audio out” cannot
be set to “Monitor”.
• When “Audio out” is set to “Monitor”, “Audio transmission mode” can only be set to “Off” or “Mic
input”.
[Monitor out]
Set the image format for images to be output to an adjustment monitor.
NTSC/PAL
• Default: NTSC
Operating Instructions 77
2 Settings
To Next Page
Loading...
