Pantech Link II - Assigning the Menu; Updating Software

22
To move a file from the card to the computer
1. Connect the data cable with mobile and the computer.
2. Select Menu > Settings > Connectivity.
3.SelectSelect USB Mode.
4.SelectMusic Player, Mass Storage, Modem or Ask on Connection.
5.Followtheinstructions on your computer screen.
note: Select Music Player when you want to add music to the playlist in your device. When you select Ask on
Connection, it will ask you to select either the Music Player or Mass Storage every time you connect your device
with your computer.
Assigning the menu
YoucansetthemostcommonlyusedmenuinOptionsinstandbymode.
1. Select GO TO > Unassigned.
2. Select Add.
3.SelectthemenuandsubmenuandselectSave.
Updating software
You can update your software without visiting your nearest dealer.
To update the software
1. Select Menu > Settings > AT&T Software Update.
2. Select Check for Update > Yes to check whether or not you need to update the software.
note:Afterdownloadingthesoftware,thedevicewillaskyouwhethertoupdatethesoftwarenoworlater.Ifyou
choose to update the software now, it will restart the handset. If you postpone updating the software, you can
selectbetween30minutes,1houror4hoursintheOptions. After selecting the updating time, you will be sent
back to standby mode. If you go to Software Update while you are in postponing, select Continue Update.