Pantech Link II - Security and PIN Management

94
Setting time for backlight
You can set the activation time for LCD or Keypad to 5 Secs, 10 Secs, 15 Secs, 30 Secs, 1 Min,
3 Mins, or 10 Mins.
1. Select Menu > Settings > Display > Backlight Timer.
2. Select LCD or Keypad.
note: Modifying backlight time may affect battery life.
Security
Locking the phone
1. Select Menu > Settings > Security > Phone Lock > Phone Lock.
2. Select On or Off.
note:Thedefaultpasswordis"1234".Tochangethepassword,selectMenu > Settings > Security > Phone Lock >
Change Password.
Locking the keypad automatically
You can set the keypad to lock automatically to prevent mistaken key presses.
1. Select Menu > Settings > Security > Auto Key Lock.
2. Select On.
3.SelectOfftounlockAutoKeyLock.
note: The auto keypad lock time is equivalent to the backlight display time. To change the backlight time, select
Menu > Settings > Display > Backlight Timer.