Pantech Link II - Using Your Headset; Service Numbers And Fixed Dialing

39
03
04
05
06
07
08
01
02
Using your headset
You can make or receive a call using a headset.
When you connect a headset to the jack, the button on the headset works as follows.
note: You must use the headset designed for this device.Itisanoptionalaccessory.Notallheadsetswillhaveabutton.
While in standby mode
1. Press the button once to list recent calls.
2. Press the button twice to redial the last call.
Service numbers and fixed dialing
Calling your service numbers
S
You can see the service number to reach the service provider.
1. Press D or select Menu > Address Book > Contacts.
2. Select [ATT Services] > Select.
3.Selectanumber.
4.PressSor select Call.
Viewing the fixed dialing list
Fixeddialingisaservicethatlimitsyouraccesstospecicnumbersintheaddressbooklist
recordedontheSIM.InputthePIN2tosetuporcancelthisservice.
1. Select Menu > Address Book > Fixed Dial Numbers.
2. To call, select a number and press S.
note:PIN2mustbecorrectlyenteredwithin3attempts.Ifyouinputtheincorrectcodethreetimesinarowthe
PIN2codewillbeblocked.IfthePIN2codeisblocked,pleasecontactyourserviceprovider.Your PIN2codeis
supplied with the SIM card.