Pantech Link II - Speed Dialing

34
2. Select Recent Calls > Call Time.
3.SelectReset > Yes.
4.EnterthepasswordandselectOK.
note:Thedefaultpasswordis"1234".
Viewing transmitted data information
1. Select Menu > Settings.
2. Select Call > Packet Counter.
•Current Info:Youcanviewtransmitteddatainthecurrentsession,inkilobytes.Sent,
Received and Total information are also available.
• Last Info:YoucanviewSent, Received, Total, and Duration information of the previous
session’s transmitted in kilobytes.
• Total Info:YoucanviewalltheSent, Received, Total, and Duration of the total transmitted
data in kilobytes.
• Clear Logs:Youcanclearcalllogs.Thedefaultpasswordis"1234".
Speed dialing
Youcandialquicklyusingspeeddialing.Upto8phonenumberscanbeprogrammedusing
numbers2to9.
:Voicemail
:Prexforinternationalcall
Setting speed dial
1. Select Menu > Address Book > Settings > Speed Dial.
2. Select an empty entry and select Add.
3.SelectacontactandselectSelect.