Paradox Spectra SP4000 Programming Guide

16 Programming Guide
Zone Labels
NOTE: For label character tables, see LCD Keypad Labels (K32LCD) on page 47.
Bus Module Labels
* Ensure all other options are deselected. Enable all options you want to reset to default. Press [ENTER] to reset the respective set of
report codes to default before exiting the section.
NOTE: For label character tables, see LCD Keypad Labels (K32LCD) on page 47.
Zone Options
[965] Reset Zone Labels
Option OFF ON
[1] Reset zone labels*
Disabled

Enabled
* Ensure all other options are deselected. Press [
ENTER] to reset the respective set of labels to default before exiting the section.
Section Zone Label Section Zone Label
[181] 1 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ [197] 17 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
[182] 2 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ [198] 18 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
[183] 3 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ [199] 19 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
[184] 4 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ [200] 20 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
[185] 5 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ [201] 21 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
[186] 6 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ [202] 22 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
[187] 7 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ [203] 23 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
[188] 8 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ [204] 24 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
[189] 9 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ [205] 25 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
[190] 10 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ [206] 26 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
[191] 11 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ [207] 27 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
[192] 12 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ [208] 28 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
[193] 13 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ [209] 29 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
[194] 14 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ [210] 30 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
[195] 15 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ [211] 31 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
[196] 16 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ [212] 32 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
[965] Reset Bus Module Labels
Option OFF ON
[5] Reset bus module labels*
 Disabled

Enabled
Section Bus Label Section Bus Label
[781] 1 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ [789] 9 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
[782] 2 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ [790] 10 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
[783] 3 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ [791] 11 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
[784] 4 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ [792] 12 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
[785] 5 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ [793] 13 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
[786] 6 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ [794] 14 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
[787] 7 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ [795] 15 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
[788] 8 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
[705] ATZ Options
Option OFF ON
[1] ATZ zone doubling 
Disabled
 Enabled
[2] ATZ wiring options 
Series
 Parallel
[3] & [4] Tamper Recognition
[5] Generate tamper on bypassed zone
 No
 Yes
[3] [4] RF Zone/Hardwired Zone Tamper Recognition Options Keypad / Bus Module Tamper Recognition Options*
OFF OFF Disabled Disabled
OFF ON Trouble only Trouble only
ON OFF When disarmed: Trouble only
When armed: Follow zone’s alarm type
Trouble only
ON ON When disarmed: Audible alarm
When armed: Follow zone’s alarm type
Audible alarm
* Tamper recognition of keypad / bus module only if section [700] option [7] is enabled.

Paradox Spectra SP4000 Specifications

General

Partitions	2
User Codes	32
Event Buffer	256 events
StayD Mode	Yes
Expandable via Expansion Modules	Yes
Bus	Yes, 4-wire expansion bus
Battery Backup	12V 7Ah
PGM Outputs	2