Paradox Spectra SP4000 Programming Guide

Magellan / Spectra SP 23
Communication Settings
General Timers
Communication Timers
[803] Event Call Direction Options 2
Option OFF ON
[1] Call tel. #1 / monitoring rcvr. #1 for tamper/restore report codes
 Disabled
 Enabled
[2] Call tel. #2 / monitoring rcvr. #2 for tamper/restore report codes
 Disabled

Enabled
[3] Call pager for tamper/restore report codes
Disabled Enabled
[5] Call tel. #1 / monitoring rcvr. #1 for trouble/restore report codes
 Disabled
 Enabled
[6] Call tel. #2 / monitoring rcvr. #2 for trouble/restore report codes
 Disabled

Enabled
[7] Call pager for trouble/restore report codes

Disabled Enabled
[804] Event Call Direction Options 3
Option OFF ON
[1] Call tel. #1 / monitoring rcvr. #1 for special report codes
 Disabled

Enabled
[2] Call tel. #2 / monitoring rcvr. #2 for special report codes
 Disabled

Enabled
[3] Call pager for special report codes
Disabled Enabled
[5] Call personal tel. # on zone alarm (burglary/fire)
 Disabled

Enabled
[6] Call personal tel. # on panic alarms
 Disabled

Enabled
[7] Call personal tel. # on paramedic alarm
 Disabled

Enabled
[8] Call personal tel. # on panel power trouble

Disabled Enabled
Section Data Description
[810] ___/___ Reporting format
TEL1 TEL2 0 = Ademco Slow
1 = Silent Knight Fast
2 = Sescoa
3 = Ademco Express
4 = Ademco Contact ID (default)
5 = SIA (not supported with GPRS/IP reporting)
[811] ___/___/___/___ Partition 1 Account number (landline / GSM communication only)
[812] ___/___/___/___ Partition 2 Account number (landline / GSM communication only)
Section Data Description
[833] ____/____/____ (000 to 255) seconds Delay alarm transmission (default 000)
[838] ____/____/____ (000 to 255) seconds Recent closing delay (default 000)
[839] ____/____/____ (000 to 255) minutes Power failure report delay (default 015)
[840] ____/____/____ (000 to 255) days Auto test report (default 000) (see section [801] options
[3] and [4] on page 22)
[850] ____/____/____/____ HH: MM Auto test report time of day (default 00:00) (see section
[801] options [3] and [4] on page 22)
[851] ____/____/____ (000 to 255) minutes Armed report delay (default 005)
[852] ____/____/____ (000 to 255) minutes Disarmed report delay (default 060)
Section Data Description
[820] ____/____/____ (000 to 255) hours Fail to Comm. Clear Event Timer (default 000 =
disabled)
[830] ____/____/____ (000 to 255) x 2 seconds TLM fail delay (default 016) (landline only)
[831] ____/____/____ (000 to 032) Maximum dialing attempts monitoring station (default
008) (landline only)
[832]* ____/____/____ (000 to 127) seconds Delay between dialing attempts* (default 020) (landline /
GSM only)
[834] ____/____/____ (000 to 127) seconds Pager reporting delay (default 020)
[835] ____/____/____ (000 to 010) Pager reporting message repetition (default 003)
[836]* ____/____/____ (000 to 127) seconds Personal reporting delay* (default 005)
[837]* ____/____/____ (000 to 010) Personal reporting message repetition* (default 003)
[901]* ____/____/____ (000 to 255) rings Number of rings* (default 008)
[902]* ____/____/____ (000 to 255) sec. (max 127) Answering machine override delay* (default 030)
* This section also applies when using a VDMP3 Plug-In Voice Dialer.

Paradox Spectra SP4000 Specifications

General

Partitions	2
User Codes	32
Event Buffer	256 events
StayD Mode	Yes
Expandable via Expansion Modules	Yes
Bus	Yes, 4-wire expansion bus
Battery Backup	12V 7Ah
PGM Outputs	2