Paradox Spectra SP4000 Programming Guide

24 Programming Guide
VDMP3 Options
NOTE: For more VDMP3 options, see Communication Timers on page 23.
Landline Communication
Panels can be programmed for landline reporting using the following sections:
* This option also applies to GSM communication.
Communication Settings
* This option also applies to GSM communication.
Refer to the Installer Quick Menu on page 65 and the Master Quick Menu in the User Guide for programming telephone
numbers.
NOTE: To erase a phone number/numeric message, press the [
SLEEP] key for each digit in the respective section.
[703] Arm/disarm with VDMP3
Option OFF ON
[8] Arm/disarm with VDMP3
 Disabled

Enabled
Section Data Description
[841] ____/____/____ (000 to 032) Maximum voice dialing attempts - VDMP3 (default 008)
[800] Dialer Options
Option OFF ON
[1] & [2]
 See Table  See Table
[3]
Switch to pulse on 5
th
attempt

Disabled Enabled
[4] Alternate dial

Disabled Enabled
[5] Force dial (must be enabled to comply with TBR-21)
 Disabled

Enabled
[6] DTMF dialing
 Disabled

Enabled
[7] Pulse ratio
1:2

1:1.5
[8] Reporting* 
Dialer activated
 No dialer
Section Data
[815]* ___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/
MONITORING STATION TELEPHONE NUMBER 1
[816]* ___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/
MONITORING STATION TELEPHONE NUMBER 2
[817]* ___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/
BACKUP TELEPHONE NUMBER
[818]* ___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/
PAGER TELEPHONE NUMBER
[819]* ___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/
NUMERIC MESSAGE SENT WITH PAGER REPORTING
Special Keys for Telephone Numbers
Press Action or Value
[
OFF] *
[
BYP] #
[MEM] switch from pulse to tone dialing or vice versa
[
TBL] 4-second pause
[
SLEEP] deletes current digit
[] inserts blank space
Telephone Line Monitoring (TLM) Options
[1] [2]
off off Disabled
off on Trouble only
on off
When disarmed: Trouble only
When armed: Audible alarm
on on Silent alarms become Audible alarm

Paradox Spectra SP4000 Specifications

General

Partitions	2
User Codes	32
Event Buffer	256 events
StayD Mode	Yes
Expandable via Expansion Modules	Yes
Bus	Yes, 4-wire expansion bus
Battery Backup	12V 7Ah
PGM Outputs	2