38 Programming Guide
System Special Report Codes (Default = FF)
NOTE: For reporting code format instructions, see page 36.
NOTE: Refer to Decimal and Hexadecimal Values on page 6.
Section Data Description Section Data Description
[875] ___/___ Cold start [876] ___/___ Installer in
___/___ Test report ___/___ Installer out
___/___ N/A ___/___ Closing Delinquency
___/___ Software out ___/___ N/A
[878] ___/___ Disarm with Keyswitch
___/___ Disarm with Keyswitch after
alarm
___/___ Alarm cancelled with
Keyswitch
___/___ N/A
To Next Page
Loading...
