COMSPHERE 3600 Series Data Service Units
Index-4 December 1996 3610-A2-GB46-60
G
G2Trb, Position, 4-7
general, configuration options, 4-10–4-15
factory defaults, A-5
worksheet, B-1–B-2
general 3600 series, technical specifications, F-2–F-4
government requirements
Canada, E
United States, C
H
health and status
device messages, E-5–E-8
LEDs, 3-4
reports, 3-6
subnetwork messages, E-9
home screen, 2-6
hubbing device
network diagnostic connection, 2-9
technical specifications, F-6
I
Identity (ID), 2-8, 3-7
field descriptions, 3-8
In-band diagnostics, diagnostic speed, 4-5
input, screens, 3-3–3-4
installation process, 2-2–2-9
configuration options, how to change, 2-5
DDS network connection, 2-8
DSU DTE connections, 2-9
network verification testing, 2-8
powering up the DSU, 2-4–2-5
verify S1 switch settings, 2-2
interface
DTE, 3-7
EIA-232 and V.35, 1-1
terminal power, 3-7
LPDA-2, 2-10
network, 1-2, 1-5
SNA diagnostic, D-1–D-2
Inval, Selection message, E-2
K
keypad, operation, 3-3
L
LADS
connection distances, F-1, F-2
operation, 1-1
Lamp test, 3-13
latching loopback, 4-4
LCD
display, 3-3
examples, 2-6
lead
clear-to-send (CTS), 4-11
line signal detect (LSD), 4-11
LEDs, 3-16
Lamp test, 3-13
status indicators, 3-4
LINE, rear panel network interface, 2-8
link
address for LPDA-2, D-2
configuration, 1-2, 2-8, 4-7
Link Delay, 4-8
link segment, LPDA-2 address, 4-16
LinkConfig, 4-7
LL by DTE, 4-12
local
loopback, 2-9, 3-10
by DTE, 4-12
menu, 3-5
loopback
bilateral, 3-11, 4-12
digital (DL), 3-10
DTE, 3-10
local, 4-12
remote digital, 4-12
examples, 3-11
latching, 4-4
local (LL), 3-10
local and DTE, 2-9
network, 3-10
remote digital (RL), 3-11
respond to remote digital, 4-12
V.54, 4-4
Loopback (Lpbk) test, 3-10–3-11
LPDA-2
Address, 4-16
Addressing, D-1–D-2
App Modul ID display, 3-8
configuration options, 4-15–4-16
factory defaults, A-4
operation, 4-15
option verification, 2-10
SNA diagnostic interface, 1-2
LPDA-2, configuration options, worksheet, B-1–B-2
LSD
Lead, 4-11
LED status indicator, 3-4
To Next Page
Loading...
