Foot end
Foot end
Head end
Head end
23
CAUTION
g
When adjusting the height or inclination angle, make sure that the bed does
not hit a wall, beam, or power outlet on the wall.
The bed, wall, or floor may be damaged or
deformed. Make sure that the bed does not hit a
wall, beam, or power plug during height or inclination
angle adjustment.
g When setting up the bed, allow at least 20 cm clearance from the wall.
g Do not get on the mattress deck when it is raised.
The main frame moves back and forth during
inclination angle adjustment and may hit a wall,
resulting in damage or deformation of the bed, wall,
or floor.
This applies excessive force to the support of the
mattress deck, resulting in damage or deformation of
the mattress deck.
Allow at least 20 cm clearance
1 BEFORE USING THE BED
To Next Page
Loading...
