PARAMOUNT BED 7B01001000A3 - Bed Preparation Procedures

28
Handheld controller (RC-1850E: accessory)
Symbol Description
Head and knee coordinated up/
down
Head up/down
Knee up/down
Height up/down
Fast
Operation sound
Setting
Date of manufacture
(YYYY-MM-DD)
Manufacturer
* It may be called “Legal Manu-
facturer” or “Brand Owner” etc.
Country of manufacture (Made
in Japan)
Model number
Symbol Description
Indicates products covered by
the EU directive on waste
electrical and electronic equip-
ment (WEEE).
This is a 2D Code (GS1 Data-
Matrix) that encodes the UDI
(UniqueDeviceIdentier)
required by the Unique Device
IdenticationSystemdesigned
to adequately identify devices
through distribution and use.
Refer to the instruction manu-
al.
Serial number
Lot number
Medical device
(This product is a medical
device or an accessory for
medical device in Europe, and
may be such a device in some
countries and regions depend-
ing on their regulations. An
accessory for medical device is
required to be labeled as “Medi-
cal Device” under medical
device regulations in Europe.)
CE mark
Authorised representaive in the
european community
Battery
Symbol Description
Powero󰀨
Power on
Indicates products covered by
the EU directive on waste
electrical and electronic equip-
ment (WEEE).
Symbol Description
Indicates products covered by
the Act on the Promotion of
E󰀨ectiveUtilizationofRe-
sources in Japan.
Caution: Indicates that there
are handling notes. Refer to
the attached document.