1 2
60
2. Operation procedure
Using the side-rail integrated panel (excluding PA-H 612*, PA-H 614*)
The side-rail integrated panel is intended for operation by physicians, nurses, and other medical
professionals. It is located on the outside of the left or right Head-end side-rail.
n Do not apply excessive force to the side-rail integrated panel or touch it
with sharp objects. The side-rail integrated panel may be damaged,
resulting in electric shock or malfunction.
n Do not allow it to be operated by a person deemed incapable of
understanding the operation (a child aged 12 or under or a person with
dementia). If a person deemed incapable of understanding the operation
operates the side-rail integrated panel by oneself, a body part may get
caught in the bed by mistake, resulting in unexpected injury. When such
a person runs the risk of operating the side-rail integrated panel by
oneself, you can use one of the following procedures to limit operation
and decrease the chance of injury.
• Set Overall lock-out on the side-rail integrated panel to disable the
operation of the side-rail integrated panel. (For the setting procedure,
see p. 65.)
• Disconnect the power plug and turn the battery off.
<Part names and functions>
1 Bed operation buttons ...Perform each bed positioning operation and electric CPR operation.
2 Function buttons ............Make a nurse call (PA-H 631* and PA-H 633* only), set Patient lock-out and
Overall lock-out, and perform night-light operations.
3 Status indication ............Indicates the battery status (excluding PA-H 611*, PA-H 612*, PA-H 613*, PA-H
614*), bed height status, and whether or not an error occurred by lamp flashing
and brightness/darkness.
To Next Page
Loading...
