EasyManua.ls Logo

PARAMOUNT BED 7B01001000A3 - Trendelenburg;Reverse Trendelenburg (Excluding PA-H 611*, PA-H 612*, PA-H 613*, PA-H 614*)

PARAMOUNT BED 7B01001000A3
120 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Foot end
Foot end
Head end
Head end
51
Trendelenburg/reverse Trendelenburg (excluding PA-H 611*, PA-H 612*, PA-H 613*, PA-H 614*)
n You can raise the head end of the bed to a
maximumangleof15˚.(Seep.63)
* When inclining the bed in a range from the
lowest position (see the table below) to less
than 43 cm, the bed rises to a height of 43 cm
and then performs the Trendelenburg/reverse
Trendelenburg operation.
n You can lower the head end of the bed to a
maximumangleof15˚.(Seep.63)
* When inclining the bed in a range from the
lowest position (see the table below) to less
than 43 cm, the bed rises to a height of 43 cm
and then performs the Trendelenburg/reverse
Trendelenburg operation.
Up
Up
Down
Down
15°
15°
Note!
When performing the reverse Trendelenburg operation with the head end of the bed lowered,
the operation is stopped when the bed becomes horizontal. To further perform the reverse
Trendelenburg operation, press the operation button again to raise the head end.
Note!
When performing the Trendelenburg operation with the head end of the bed raised, the oper-
ation is stopped when the bed becomes horizontal. To further perform the Trendelenburg
operation, press the operation button again to lower the head end.
<Trendelenburg>
<Reverse Trendelenburg>
2 FUNCTIONS AND OPERATIONS

Table of Contents

Related product manuals