PARAMOUNT BED 7B01001000A3 - Page 51

Foot endHead end
50
<Height adjustment>
n You can adjust the bed height.
You can adjust the height from the floor to
mattress deck top in the range shown below.
For the dimensions,
see the table below.
125 mm single-wheel with resin cover 35.8 to 80.8 cm
125 mm single-wheel with iron cover (total lock) 36.3 to 81.3 cm
125 mm double-wheel with resin cover 35 to 80 cm
125 mm single-wheel with iron cover (individual lock) 36.3 to 81.3 cm
150 mm single-wheel with resin cover 38.8 to 83.8 cm
g Pause function
When lowering the bed, an alarm sounds and the movement is stopped when the height from floor to
mattress deck top (floor height) reaches 43 cm to ensure safety. Press the down button again to lower the
bed to its minimum height while the alarm sounds continuously.
* Lowering a side-rail with a floor height of 43 cm creates a gap of 14 cm between the floor and side-rail.
Note!
Ifyouoperatethebedwithaoorheightoflowerthan43cm,thebedisloweredalltheway
down to the minimum height without stopping while the alarm sounds continuously.