Head end
41
Connecting to the power supply
WARNING
Do not connect multiple cables to a single outlet.
If other electrical equipment is plugged into the
same outlet and the rated capacity of the outlet or
extension cable is exceeded, the power cable and
plug may overheat and cause fire.
<Outlet>
n Use a properly wired grounded outlet for each bed
that meets the power consumption requirements
of the bed. Also, firmly insert the power plug into
the outlet.
n When installing the bed, place it where connecting
and disconnecting the power plug will not be
blocked.
n After use, disconnect the power plug from the
outlet. For a model with a battery, also turn the
battery off.
Wind the power cable around the cable storage
hooks before moving the bed.
<Using the cable storage hooks>
Power plug
Grounded outlet
Cable storage hooks
Power cable
* The illustration uses a type C power plug for explanation.
Headboard
1 BEFORE USING THE BED
To Next Page
Loading...
