Foot endFoot end
88
Bed linen rack
Model No.
PC-5060
n Load capacity is 1 kg. Do not set an article exceeding the load capacity
because it may cause the linen rack to be damaged or deformed.
n Attach the bed linen rack in the correct orientation. If attached in the
wrong orientation, the rack may hit the patient, resulting in injury.
g The bed linen rack can be used for setting the linen temporarily when bedmaking.
1. Hang the bed linen rack on the footboard with the rack facing the outside of the bed.
2. When using the bed linen rack, pull the rack out.
3. After using the bed linen rack, push the rack to the clip.
Note!
When the bed linen rack is being used, the following accessories cannot be attached to the
footboard.
• Side-rail spacer holder (PC-5118)
• Monitor table (PC-5119)
Clip Clip
Rack Rack
Using the bed linen rack Storing the bed linen rack
To Next Page
Loading...
