25
CAUTION
g Do not move the bed while holding the side-rails.
This applies excessive force to the side-rails, resulting in damage or deformation of the side-rails.
gAvoidmovingthebedoverunevenoors.
g Attach a handheld controller (standard or accessory) or BED Navi (acces-
sory) suitable for the bed.
n If a handheld controller or BED Navi not suitable for the bed is attached by mistake, the bed may
malfunction.
n A suitable handheld controller or BED Navi may be different among beds of the same series due to
specification changes. Before attaching a handheld controller or BED Navi to the bed, check the model
number and shape of the handheld controller or BED Navi to make sure that they are the same as
those of the handheld controller or BED Navi suitable for the bed. (See p. 69 and p. 73 to 77)
g Do not apply a spray-type insecticide directly to the bed.
The solvents contained in the insecticide may damage, discolor, or dissolve the casters or other resin
parts of the bed. Furthermore, damaged or dissolved parts may cause accidental injury.
g To avoid possible malfunctions, avoid installing in the following locations.
n Locations exposed to direct sunlight
n Locations exposed to cool or warm air from an air conditioner
n Locations exposed to excessive water or oil vapor
n Locations exposed to high temperature or humidity, low temperature, and dryness
n Locations with a large amount of dust, smoke, salt, sulfur, or corrosive substances
n Locations with poor ventilation
n Locations exposed to vibration and shock
n Locations where the floor is not flat
n Locations where the floor is not strong enough
This may cause damage to the bed, or deformation
or failure of the bed. If you must move the bed, move
it as slowly as possible.
1 BEFORE USING THE BED
To Next Page
Loading...
