EN
eFlow
®
rapid nebuliser system – Questions about your device? Contact your service partner 35
en
N Technical Data
N Technical Data
eFlow
®
rapid Performance Characteristics
Aerosol data according to ISO 27427; nebulised medium: Salbutamol 2.5 ml. Measured values may vary depending on the medication used.
Recommended fill volume: see package leaflet for the medication
a) Measurement with Next Generation Pharmaceutical Impactor (NGI) at 23 °C and 50% relative humidity. Inspiratory flow: 15 l/min.
b) Measurement with breathing simulator at 23 °C and 50% relative humidity. 500 ml breathing volume, breathing frequency 15 cycles/minute, sinusoidal
breathing pattern, inhalation/exhalation ratio 1:1 (with adults, may vary in children).
For performance characteristics for a nebuliser handset specifically approved for and/or supplied with a drug refer
to the information about the drug.
Weight: controller and connection cord 210 g / 8 oz
Dimensions (LxWxH): controller (approx.) 16 x 7 x 2 cm / 6.3 x 2.8 x 0.8 in
Weight: nebuliser handset 55 g / 1.9 oz
Dimensions (LxWxH): nebuliser handset (approx.) 14.5 x 5.0 x 6.3 cm / 5.7 x 2 x 2.5 in
PARI power supply
(REF 078B7116 for international power supply)
Input: 100 - 240 V, 50-60 Hz
Output: 5 V
Total power consumption < 3.5 Watt
Sound pressure level (nebuliser handset) < 33 dB (A)
Min. fill volume 2.0 ml
Max. fill volume 6.0 ml
MMAD
a)
(Mass Median Aerodynamic Diameter) 4.6 m
GSD
a)
(Geometric Standard Deviation) 1.8
Respirable fraction
a)
< 5 m
< 2 m
2 - 5 m
55%
6.5%
48.5%
Aerosol output
b)
0.62 g
Aerosol output rate
b)
0.5 g/min
To Next Page
Loading...
