Pari eFlow rapid - I Taking Your Treatment

I Taking Your Treatment
22 eFlow
®
rapid nebuliser system – Questions about your device? Contact your service partner
I Taking Your Treatment
Step I1 Add the drug to the medication reservoir. Make
sure the nebuliser handset is on a flat, stable
surface.
Fig. I1
Step I2 Attach the medication cap by aligning the tabs on
the medication cap with the tab slots on the
medication reservoir.
Turn the medication cap clockwise until it stops.
Note: As the medication cap is turned, the inner
cap (a) will rise until it matches the height of the
outer cap.
Note: Before use, note that your device must be
properly assembled and the medication reservoir is
sealed. Use of an improperly assembled device
could decrease the effectiveness of your treatment.
Fig. I2
CAUTION
Do not attempt to inhale essential oils with an
eFlow
®
rapid nebuliser handset, as this can irritate
the airways (intense coughing).
WARNING
- Do not overfill the nebuliser handset. Always
make sure the medication is not above the max-
imum fill level (see upper scale graduation mark
on the nebuliser handset).
- To ensure the correct dose, never use another
drug for a drug-specific nebuliser handset than
the one approved, and do not use with an
eFlow
®
rapid nebuliser handset.
a