Pari eFlow rapid - Quick Instructions

40 eFlow
®
rapid nebuliser system – Questions about your device? Contact your service partner
Quick Instructions
1. Please read the entire Instructions for Use taking note of all warnings and cautions.
2. Find these parts (for detailed instruction see page 8).
3. Clean your nebuliser handset parts before you use them for the first time and immediately after each use
(for detailed instruction see page 12).
4. Disinfect your nebuliser handset parts after each treatment day (for detailed instruction see page 15).
Rinse each nebuliser handset part
for about 5 seconds.
Soak parts for 5 minutes in warm
soapy water and then rinse
thoroughly.
Disinfect by boiling for 5 minutes in
distilled water or use one of the
other methods, then air-dry.
Nebuliser Handset
eBase
®
Controller
Connection
Cord
Aerosol
Head
Nebuliser
Handset Body
Inspiratory
Valve
Medication
Cap
Mouthpiece