Pari eFlow rapid - General Information About the Nebuliser Handset and Controller

EN
eFlow
®
rapid nebuliser system – Questions about your device? Contact your service partner 9
en
C Parts of Your eFlow
®
rapid nebuliser system
General Information About the Nebuliser Handset and Controller
The nebuliser handset body is pre-assembled when delivered and
contains the blue inspiratory valve.
You can open the nebuliser handset body by gently pulling up on the
tab (c).
The medication reservoir (a) and the aerosol chamber (b) are attached
using a "hinge" and must not be detached from one another.
The ON/OFF button (a) in the top right corner of the device turns
controller on and off.
c
b
a
CAUTION
Do not touch the silver center part of the aerosol head. Touching it
may damage the membrane that generates the aerosol.
a