software tools and files required for programming and downloading software
for the VMM2404.
Note: With the exception of the PC and desktop power supply, all materials
and software are available from Parker Vansco. Please consult your Parker
Vansco Account Representative for specific details and pricing information.
2.3. Install the Required Software Tools
Before using the VMM2404 multiplexing module, install the following software
tools onto your PC:
Data Link Adapter (DLA) drivers
The DLA acts as the interface between the PC and the VMM2404. Before
using the DLA, you must install the DLA drivers.
Parker Vansco Software Tools
Parker Vansco provides the VMMS software tool to create and download
software for the VMM2404 multiplexing module. Contact your Parker
Vansco Account Representative, or visit the Parker website to get further
information on how obtain a product key.
2.3.1. Install the Data Link Adapter Driver Software
A Data Link Adapter (DLA) is needed when connecting the VMM2404
multiplexing module in a development system.
Note: Parker Vansco provides the latest DLA software releases through its
web site. Please contact your Parker Vansco Account Representative for
details on how to download the latest DLA driver software.
The Parker Vansco DLA requires the installation of drivers on your PC. To install
the Parker Vansco DLA drivers:
1. Download the driver, run the extracted file, and follow the Install Wizard. Do
not connect the USB-DLA until the driver installation is completed.
2. Connect the USB-DLA to a USB port on your PC. The Found New Hardware
screen opens.
3. Select Install the software automatically (Recommended), and then click
Next. If the driver is not detected automatically, you can browse to the folder
containing the driver.
4. After installation is finished, click Finish. The USB-DLA is now recognized
and ready to be used.
See the Parker Vansco USB-DLA kit user manual for more detailed instructions.
To Next Page
Loading...
Need help?
General
