The Vansco Multiplex Module (VMM) 2404 is a software-programmable,
multiplexing, input/output controller that monitors dedicated and general-purpose
inputs, and controls solid-state-switch outputs.
The VMM modules can be configured to meet many system requirements through
I/O configuration options and ladder logic software.
Figure 1: VMM2404
The VMM2404 is designed to communicate through a J1939-based Controller
Area Network (CAN). Custom CAN messaging can be created in software, and
the VMM2404 can be used in any CAN 2.0B application.
The VMM2404 is controlled by ladder logic software.
You can write the software in ladder logic using the Vansco Multiplex
Module Software (VMMS) tool. Contact your Parker Vansco Account
Representative for more details about the VMMS.
The VMM2404 has many features, as follows
The VMM2404 can monitor up to 30 inputs:
15 general-purpose inputs (can be used as digital, analog, or frequency)
9 programmable digital inputs (can be active-high or active-low)
To Next Page
Loading...
Need help?
General
