Because every system is different, it is not feasible to provide detailed installation
instructions that will be suitable for every assembly. This chapter therefore
provides only high-level guidelines on installing the VMM2404.
The vehicle manufacturer is responsible for creating procedures for mounting
the VMM2404 in a vehicle during production assembly.
9.1. Mechanical Installation Guidelines
Use the following guidelines when installing the VMM2404 in a vehicle.
9.1.1. Dimensions
The following shows the dimensions of the VMM2404:
Figure 19: Dimensions of the VMM2404
9.1.2. Selecting a Mounting Location
The VMM2404 can be installed in the vehicle's cab or on the chassis. If used in a
marine application, ensure that it is protected from excessive salt spray.
To Next Page
Loading...
