Figure 14: Logic and output power installation connections
5.2. Sensor supply
The VMM2404 has one pin, labeled SENSOR_SUPPLY, dedicated to providing
power to external sensor.
Warning! Do not drive more than 100 mA of current through the
SENSOR_SUPPLY pin. Doing so will cause the pin to protect itself by
dropping the voltage, which will result in a lack of power to the sensors,
causing unknown vehicle responses.
5.2.1. Sensor Power Capabilities
SENSOR_SUPPLY is a 5V linear power supply that is capable of continuously
providing up to 100mA to external sensors.
To Next Page
Loading...
