Parker Vansco - Mating Connector Part Numbers; Pinouts

User Guide 45
Connectors
8.1. Mating Connector Part Numbers
The following table shows the part numbers for the mating connectors and
terminals that are used in the vehicle harness:
Mating Connector Part Numbers
Connector
Shell part number
Terminal part number
Black (J1) 35-pin
AMP 776164-1
20-16AWG, Gold: AMP 770854-3
Black (J2) 23-pin
AMP 770680-1
20-16AWG, Gold: AMP 770854-3
8.2. Pinouts
Connector pins connect to inputs, outputs, power, and communication channels.
They provide the interface between the vehicle harness and the internal circuitry
of the VMM2404.
The following tables show the pinouts for the 35-pin and 23-pin connector,
respectively:
Black (J1) 35-Pin Connector Pinout
Pin
Name
Function
1
OUTPUT3_3A_HS
3A High-side output
2
OUTPUT7_3A_LS
3A Low-side output
3
SENSOR SUPPLY
Power for external sensors
4
ADDR4
Addressing digital input
5
ADDR3
Addressing digital input
6
ADDR2
Addressing digital input
7
ADDR1
Addressing digital input
8
VBATT
Logic and output power
9
VBATT
Logic and output power
10
VBATT
Logic and output power
11
OUTPUT5_3A_LS
3A Low-side output
12
OUTPUT1_3A_HS
3A High-side output
13
N-C
Not connected
14
ADDR5
Addressing digital input
15
CAN1_H
CAN 1 High
16
GND
Ground
17
INPUT6_ADF
Input: Analog, Digital, or Frequency