What kind of circuits can be created with the outputs?
Outputs can be used to create high-side, low-side, and H-bridge circuits, as shown
in the following:
How do I program the VMM?
The VMM can be programmed using ladder logic. Consult your Parker Vansco
Account Representative for more details.
Do the output currents require de-rating in certain conditions?
VMM outputs do not require de-rating. They are specified to operate continuously
at the maximum temperature and the maximum rated current.
Can I plug my existing sensor into a VMM, and if so, how do I configure the input?
Refer to Sensor Power see "Sensor supply" on page 37, or Connecting Various
Sensors on page 58 for details on connecting sensors. Contact your Parker Vansco
Account Representative for more information if needed.
Is it possible to purchase the VMM with a company logo printed on it?
Parker Vansco may consider customizing the overlay on a case-by case-basis.
Consult your Parker Vansco Account Representative for details.
Is it possible to purchase a pre-programmed VMM?
Yes. Contact your Parker Vansco Account Representative for details on getting
your VMM pre-programmed.
What torque should I apply to the mounting bolts?
Refer to the fastener manufacturer's recommendations for mounting bolt
tightening torque.
To Next Page
Loading...
