Does the VMM support wireless connections?
The VMM does not support wireless connections; however, Parker Vansco offers
a CAN to WiFi module. Contact your Parker Vansco Account Representative for
details.
Can I connect the VMM to my existing J1939 devices?
Yes. The VMM is fully J1939 compatible and has generic J1939 messaging
capability to support any custom communication scheme.
Can I use the VMM to power another VMM?
Yes, an output on your VMM can be used to power other VMMs, or to excite
other VMMs' power control inputs.
Does the VMM2404 support "Wake on CAN"?
No.
Can I run my VMM CAN bus faster than 250 kbps?
No. When the VMM is used in a VMM system, it can only communicate at
250kbps.
Can I use other Parker Vansco products such as the CM3620 with my VMMs?
Yes, however, the software required for each is different. Interfacing to these type
modules must be done through the generic CAN and J1939 messaging included in
the VMMS software tool.
To Next Page
Loading...
