PSS 2 B2
■ 2
│
GB
│
IE
Introduction
Information about these operating instructions
Congratulations!
You have purchased a high-quality product. Familiarise
yourself with the product before using it for the first time. To
do this, read the following operating instructions thoroughly. Use the
product only as described and for the range of applications specified.
Keep these operating instructions in a safe place. Please also pass
these operating instructions on to any future owner(s).
Proper use
The product is used exclusively for measuring angles and then sawing
exact mitres. Internal and external angles from 85° to 180° can be
measured. You can saw wooden workpieces, e.g. skirting boards,
with a max. height of 100 mm and a width of 5 to 30 mm. Commer-
cial or industrial use is not permitted. No liability will be assumed
in cases of improper use. No liability will be assumed for damage
caused by misuse or improper handling, the use of force or unautho-
rised modification. The risk is borne solely by the user.
IB_380558_PSS2B2_LB8.indb 2 05.04.2022 12:24:35
To Next Page
Loading...