31
Preview Settings
If Preview with ext. signals is set to Yes: Trigger Mode
Ext. Exp. Start or Acquire Mode External are active
during Live Preview in case the Trigger Mode or Acquire
Mode is enabled in the Preview set.
Use this during Live Preview e.g. for external
synchronization of a camera and an external light source.
Reminder Dialog
If you made a recording but did not save it yet, Camware reminds to
save the record before starting a new one.
Extended Recorder
Extended Recorder can be activated (see 6.9.5).
• Record / Stop record / Play
• First Image (jump to first image) / Back Fast (jump backward) /
Back (jump one image backward)
• Forward (jump one image forward) / Forward Fast (jump
forward) / Last Image (jump to last image in record)
Recording with Multiple Cameras
With all cameras activated recording starts simultaneously on all
of them.
Recorder uses Recorder Mode settings (Sequence or Ring
Buffer) of the active camera for all cameras (see 6.3.5)
For single camera recording, deactivate cameras by removing the
check mark from the box.
To Next Page
Loading...
Need help?
General
