34
Right-Click Menu
Right-click on thumbnails.
Allows to rebuild all thumbnails and to search for events.
Furthermore, the Set In / Out gives you the possibility to
set values for a sequence, which can be played via play
button. Reset In / Out discards these settings.
Set In / Out is active: if you save / export your images,
only the selected images are saved / exported (see 6.9.2).
The light gray area in the upper scale shows an In-
Out example area. To define a new area: just right-
click on the start and end frame in one of the scales.
The In image must be left to the red bar, the Out image to the right of
the red bar.
Adjust the In / Out area by holding down the left mouse button and
slide the boarders to increase / decrease.
Search Events in Thumbnails: detected events are
displayed as green bars.
Too Dark or Bright Thumbnails
If thumbnails are too dark or too
bright, right-click in View Window
(see 6.9.8) and select Auto Range
Peak or Auto Range Crop. Then
right-click on a thumbnail image
and select Rebuild Thumbnails. Now the thumbnail images should
conform to the View Window.
Keyboard Scrolling
Page up / down keys: 10 images up or down.
Arrow keys: quick scrolling through the images.
Advantage: fluent video playback in the View Window (forwards or
backwards).
Home/Pos1 key: first image.
End key: last image.
Addtional Short-Cuts
While mouse is in the thumbnail area in Recorder (Images):
Press CTRL + left mouse button to jump to the first image
Press CTRL + right mouse button to jump to the last image
To Next Page
Loading...
Need help?
General
