7
3. SYSTEM COMPONENTS
The camera system includes the following parts.
Camera Head
C-mount optical connection:
The distance between the front edge of the c-mount and the sensor is
17.52 mm. For standard c-mount lenses and adapters.
(connect to power supply)
USB 2.0 Connector (connect to PC)
RJ11 (connect to I/O device)
LED indicates camera status
Green continuous: camera is ready
Green blinking: camera is in record
s
t
a
te
Red continuous: error /red blinking: boot lo
a
d
e
r
Red/green blinking: firmware upd
a
t
e
Serial Number Tag
Mounting Thread
3/8
16 UNC 1/4"- 20 UNC
Trigger Interface (I/O Device)
Proprietary RJ11-BNC connector for Trigger/Busy/Exposure signals
Power Supply
AC to 12V/DC power supply
USB-A/USB-B cable (5 m)
Digital Camera Tools (USB storage device content)
• Camware: software for camera control & image acquisition
• Camera driver & tools
• Software development kit (SDK) & demo programs in C and C++
To Next Page
Loading...