User Manual PEAK INSTRUMENTS INC
18
2.2. Set measuring mode
Press the set button, enter the measurement mode settings menu, select the
desired test mode, press [ENTER] to confirm. If you choose the energy model,
energy window appears and prompts to select the amplifier gain.
2.3. Set wavelength
Set the current working wavelength range 190nm-1100nm, press the up and
down button to open wavelength setting window, press [0] - [9] to enter the
desired wavelength, press [CLEAR] to clear the input, press [ENTER] to confirm.
Input errors or exceeds the set range buzzer alarm.
2.4. Correction 100%T/0Abs
To Next Page
Loading...