Leading Minor Kicker
1.
For cases previously run, refer to the View Setup Values PanelView screen
for scale settings.
2. Loosen the quick-release handle.
3. Slide the leading minor kicker up- or downstream to the appropriate scale
setting.
4. Tighten the quick-release handle.
5.
For initial setup, erect a case at the setup area.
6. Loosen the quick-release
handle.
7. Slide the leading minor kicker
up- or downstream until it
holds the flap along the
scoreline.
8. Position as far forward as
possible.
9. Tighten the quick-release
handle.
CE35-T Case Erector Operations Manual
3/2/2010 M-CE35T-2c Horiz Mag
54
serudecorP revoegnahC
Fig. 45: Leading Minor Kicker
Fig. 46: Proper Adjustment of Minor Flap
Kickers
To Next Page
Loading...