Trailing Minor Kicker
1.
For cases previously run, refer to the View Setup Values PanelView screen
for scale settings.
2. Loosen the quick-release handle.
3. Slide the trailing minor kicker up- or downstream to the appropriate scale
setting.
4. Tighten the quick-release handle.
5.
For initial setup, erect a case at the setup area.
6. Loosen the quick-release
handle.
7. Slide the trailing minor kicker
up- or downstream until it
holds the flap along the
scoreline.
8. Tighten the quick-release
handle.
Operations Manual CE35-T Case Erector
M-CE35T-2c Horiz Mag 3/2/2010
Changeover Procedures
55
Fig. 47: Trailing Minor Kicker
Quick-Release Handle and Scale
Fig. 48: Proper Adjustment of Minor Flap
Kickers
To Next Page
Loading...