MY22P01 - 12_1.0_31.08.2021
3
Contents
3.4.5.2 SHIMANO hub gear 56
3.4.6 Hand brake 57
3.4.7 Fork lock 58
3.4.7.1 SR Suntour 58
3.4.8 Battery level indicator (battery) 59
3.4.8.1 Battery level indicator (battery) 59
3.5 Technical data 60
3.5.1 Pedelec 60
3.5.2 Emissions 60
3.5.3 Bicycle lighting 60
3.5.4 BOSCH Intuvia on-board computer 60
3.5.5 USB port 60
3.5.6 Motor 60
3.5.6.1 BOSCH Performance Line CX 60
3.5.7 Rechargeable battery 61
3.5.7.1 BOSCH PowerTube 400 61
3.5.7.2 BOSCH PowerTube 500 61
3.5.7.3 BOSCH PowerTube 625 61
3.5.8 Tightening torques 62
4 Transporting and storing
4.1 Weight and dimensions for transportation 64
4.2 Designated handles, lifting points 68
4.3 Transportation 69
4.3.1 Using the brake transport securing system 69
4.3.2 Transporting the pedelec 69
4.3.3 Shipping a pedelec 69
4.3.4 Transporting the battery 69
4.3.5 Shipping the battery 69
4.4 Storing 70
4.4.1 Break in operation 70
4.4.1.1 Preparing a break in operation 70
4.4.1.2 Carrying out a break in operation 70
5 Assembly
5.1 Unpacking 71
5.2 Required tools 71
5.3 Commissioning 72
5.3.1 Checking the battery 72
5.3.2 Preparing the battery 73
5.3.2.1 Retrofitting the PowerTube adapter 73
5.3.2.2 Fit battery cover onto Bosch PowerTube 625 battery (horizontal) 75
5.3.2.3 Fit battery cover onto Bosch PowerTube 500 battery (horizontal) 76
5.3.3 Preparing the wheel 77
5.3.4 Installing the wheel in the SUNTOUR fork 78
5.3.4.1 Screw-on axle (12AH2 and 15AH2) 78
5.3.4.2 20 mm cross axle 79
5.3.4.3 Q-LOC quick release 81
5.3.5 Preparing the LIMOTEC seat post 82
5.3.6 Fitting the pedals 83
5.3.7 Checking the stem and handlebars 84
5.3.7.1 Checking the connections 84
5.3.7.2 Checking stem is firmly in position 84
5.3.7.3 Checking the headset backlash 84
5.4 Pedelec sale 84
6 Operation
6.1 Risks and hazards 85