MY22P01 - 12_1.0_31.08.2021
89
Operation
530 Battery error 1 Switch off system.
2 Remove the battery.
3 Re-insert battery.
4 Restart electric drive
system.
5 Contact your specialist
dealer if the problem
persists.
531 Configuration error 1 Re-start the system.
2 Contact your specialist
dealer if the problem
persists.
540 Temperature error
The pedelec is outside
the permitted temper-
ature range.
1 Switch off the system to
cool the motor and
battery down or warm
them to the permitted
temperature range.
2 Re-start the system.
3 Contact your specialist
dealer if the problem
persists.
550 An inadmissible elec-
trical load has been
detected
1 Remove consumer.
2 Re-start the system.
3 Contact your specialist
dealer if the problem
persists.
580 Software version error 1 Re-start the system.
2 Contact your specialist
dealer if the problem
persists.
591 Authentication error 1 Switch off system.
2 Remove the battery.
3 Re-insert battery.
4 Re-start the system.
5 Contact your specialist
dealer if the problem
persists.
592 Incompatible compo-
nent
1 Insert compatible on-
board computer.
2 Re-start the system.
3 Contact your specialist
dealer if the problem
persists.
593 Configuration error 1 Re-start the system.
2 Contact your specialist
dealer if the problem
persists.
Code Description Method of resolution
Table 42: List of on-board computer error messages
595,
596
Communication error 1 Check cabling to the
gears.
2 Re-start the system.
3 Contact your specialist
dealer if the problem
persists.
602 Internal error during
charging
1 Disconnect charger from
battery.
2 Re-start the system.
3 Connect charger to the
battery.
4 Contact your specialist
dealer if the problem
persists.
602 Internal fault 1 Re-start the system.
2 Contact your specialist
dealer if the problem
persists.
603 Internal fault 1 Re-start the system.
2 Contact your specialist
dealer if the problem
persists.
605 Temperature error
The pedelec is outside
the permitted temper-
ature range.
1 Switch off the system to
cool the motor and
battery down or warm
them to the permitted
temperature range.
2 Re-start the system.
3 Contact your specialist
dealer if the problem
persists.
605 Temperature error
during the charging
process
1 Disconnect charger from
battery.
2 Leave battery to cool
down.
3 Contact your specialist
dealer if the problem
persists.
606 External fault 1 Check cabling.
2 Re-start the system.
3 Contact your specialist
dealer if the problem
persists.
610 Voltage error 1 Re-start the system.
2 Contact your specialist
dealer if the problem
persists.
620 Charger error 1 Replace charger.
2 Contact your specialist
dealer if the problem
persists.
Code Description Method of resolution
Table 42: List of on-board computer error messages
To Next Page
Loading...