EasyManuals Logo

Pendulum CNT-91R Programmer's Handbook

Default Icon
264 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #125 background imageLoading...
Page #125 background image
Command Reference 8-17
:CALCulate :LIMit :FAIL?
Limit Fail
Returns a 1 if the limit testing has failed (the measurement result has passed the
limit),anda0ifthelimittestinghaspassed.
The following events reset the fail flag:
Power-on
*RST
A:CALC:LIM:STAT8OFF ® :CALC:LIM:STAT8ON transition
Reading a 1 with this command.
Returned format: 1| 0¿
Example:
SEND®
SENS:FUNC8‘FREQ’;:CALC:LIM:STAT8ON;:CALC:LIM:UPPER
81E3;READ?;*WAI;:CALC:LIM:FAIL?
READ¬ 1
if frequency is above 1kHz, otherwise 0
Complies with standards: SCPI 1991.0, confirmed.
:CALCulate :LIMit :FCOunt :LOWer?
Number of Limit Failure Counts
The command returns the number of times the set lower limit has been passed
since the counter was last reset by :CALC:LIM:CLEAR or automatically by :INIT
if :CALC:LIM:CLEAR:AUTO ON has been activated.
Returned format: < No. of counts>¿

Table of Contents

Other manuals for Pendulum CNT-91R

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Pendulum CNT-91R and is the answer not in the manual?

Pendulum CNT-91R Specifications

General IconGeneral
BrandPendulum
ModelCNT-91R
CategoryMeasuring Instruments
LanguageEnglish

Related product manuals