To Next Page

To Previous Page

8-68 Command Reference

:MEASure :PERiod?

[8 [<expected value> [,<resolution>]][,<(@«1|2|3»)>]]

Period

A traditional period time measurement is performed on a single period. Measuring

time set by the :ACQ:APER command does not affect the measurement.

The <expected value> and <resolution> are used to calculate the Measurement

Time ([:SENSe]:ACQuisition:APERture).

Parameters:

<expected value> is the expected Period,

<resolution> is the required resolution,

<(@«1|2|3»)> is the measurement channel:

(@1) means input A

(@2) means input B

(@3) means input C (RF input option)

If you omit the channel, the instrument measures on input A (@1).

Complies with standards: SCPI 1991.0, confirmed.

:MEASure :PERiod :AVERage?