EasyManuals Logo

Pendulum CNT-91R Programmer's Handbook

Default Icon
264 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #222 background imageLoading...
Page #222 background image
Command Reference 8-114
:SYSTem :COMMunicate :GPIB :ADDRess
8 «<Numeric value>|MAX|MIN» [,«<Numeric value>|MAX|MIN»]
Set GPIB Address
This command sets the GPIB address. It is valid until a new address is set, either
by sending a new bus command or via the front panel USER OPT menu.
Parameters:
<Numeric value> is a number between 0 and 30.
MIN sets address 0.
MAX sets address 30.
[,<Numeric value>|MAX|MIN] sets a secondary address. This is accepted but not
used in the '9X'.
[:SELF] 8 This optional parameter is accepted by the '9X'.
Returned format:> <Numeric value>¿
Example:
SEND®
:SYST:COMM:GPIB:ADDR 8 12
This example sets the bus address to 12.
Complies with standards: SCPI 1991.0, confirmed.
:SYSTem :ERRor?
Queries for an ASCii text description of an error that occurred. The error messages
are placed in an error queue, with a FIFO (First In-First Out) structure. This queue
is summarized in the Error AVailable (EAV) bit in the status byte.
Returned format:
<error number>,"<Error Description String>"¿
Where:
<Error Description String> = an error description as ASCii text.
See also: Chapter 7, error messages.
Complies with standards: SCPI 1991.0, confirmed.

Table of Contents

Other manuals for Pendulum CNT-91R

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Pendulum CNT-91R and is the answer not in the manual?

Pendulum CNT-91R Specifications

General IconGeneral
BrandPendulum
ModelCNT-91R
CategoryMeasuring Instruments
LanguageEnglish

Related product manuals