Safety
Even though we know that you are eager to
get going, we urge you to take a few minutes
to read through this part of the introductory
chapter carefully before plugging the line
connector into the wall outlet.
This instrument has been designed and tested
for Measurement Category I, Pollution
Degree 2, in accordance with EN/IEC
61010-1:2001 and CAN/CSA-C22.2 No.
61010-1-04 (including approval). It has been
supplied in a safe condition.
Study this manual thoroughly to acquire ade-
quate knowledge of the instrument,
especially
the section on Safety Precautions hereafter
and the section on Installation on page 1-7.
All equipment that can be connected to line
power is a potential danger to life. Handling
restrictions imposed on such equipment
should be observed.
To ensure the correct and safe operation of
the instrument, it is essential that you follow
generally accepted safety procedures in
addition to the safety precautions specified in
this manual.
The instrument is designed to be used by
trained personnel only. Removing the cover
for repair, maintenance, and adjustment of
the instrument must be done by qualified
personnel who are aware of the hazards
involved.
The warranty
commitments are rendered
void if unauthorized access to the interior
of the instrument has taken place during
the given warranty period.
USER MANUAL ● CNT 9x Series ● Rev.22 February 2020
To Next Page
Loading...
Need help?
General
