This chapter describes the different
measuring functions of the counter. They
have been grouped as follows:
Frequency measurements
— Frequency
— Period
— Ratio
— Burst frequency and PRF.
— FM
— AM
Time measurements
— Time interval.
— Pulse width.
— Duty factor.
— Rise/Fall time.
See also the front panel layout on page 2-3 to
find the keys mentioned in this section together
with short descriptions.
Press MEAS FUNC to open the main menu for
selecting measuring function. The two basic
methods to select a specific function and its
subsequent parameters are described on page
2-7.
USER MANUAL ● CNT 9x Series ● Rev.22 February 2020
4-2
To Next Page
Loading...
