Pentair AUTOTROL 604 - Motor and Camshaft Replacement

Installer Manual Autotrol 368 / 604-606 - Maintenance
42 / 54 Ref. MKT-IM-007 / A - 16.12.2016
9.2.6. Motor and camshaft replacement
No. Operation
A Turn the locking clip (3) on the left to unlock the controller (2).
B Remove the controller (2) from the valve body (1).
Caution
Be careful with cables connections when disassembling the controller (2).
C Loosen the screws (6) and remove the clamp (5).
D Remove and disassemble the camshaft (7) from the motor (4).
E Reverse above procedure steps to rebuild.
A