Installer Manual Autotrol 368 / 604-606 - Generalities
6 / 54 Ref. MKT-IM-007 / A - 16.12.2016
1.4. Abbreviations used
DF............................................................ Down Flow
Inj ............................................................ Injector
DLFC ....................................................... Drain Line Flow Controller
BLFC / Refill Flow Controller................. Brine Line Flow Controller
QC............................................................ Quick Connect
Regen...................................................... Regeneration
SBV.......................................................... Safety Brine Valve
TC ............................................................ Time Clock
1.5. Norms
1.5.1. Applicable norms
Comply with the following guidelines:
• DM174: "Regulation of materials and objects that can be used in stationary collection, treatment,
supply and distribution of water intended for human consumption"
• 2006/42/EC: Machinery Directive
• 2014/35/UE: Low Voltage Directive;
• 2014/30/UE: Electromagnetic compatibility;
• 2011/65/EC: Restriction of use of certain hazardous substances in electrical and electronic
equipment (RoHS)
Meets the following technical standards:
• IEC/EN 60335-1
• IEC 61010-1
• EN 55014-1
• EN 55014-2
• EN 61000-3-2: 2006 + A1: 2009 + A2: 2009
• EN 61000-3-3: 2008
• EN 61000-6-2: 2005
• EN 61000-6-3: 2007 + A1: 2011
• EN 61326-1
1.5.2. Available certificates
1.6. Procedure for technical support
Procedure to follow for any technical support request:
A Collect the required information for a technical assistance request.
→ Product identification (see 2.2. Safety tags location, page 8 and 9.1. Recommendations,
page 37);
→ Problem description of the device.
B Please refer to the "Troubleshooting" chapter, page 46. If the problem persists contact your
supplier.
•CE •ACS
•DM174
Access to all certifications:
To Next Page
Loading...
