Installer Manual Fleck 2910 - NXT - Installation
40 / 114 Ref. MKT-IM-002 / B - 23.05.2018
5.5.2. Side-mounted valve installation
Valid for location having a reduced height.
• To avoid the piping supporting the valve and side adapter weight, they must be fixed on a tripod
or any other appropriate support;
• in order to adequately compensate the tank elongation, the rubber expansion joints must be
mounted on the top and bottom of the tank. In red on the diagram above.
Inlet
Outlet shutoff
Support tripod
Inlet shutoff
Manual shutoff valve bypass
Outlet
Unit 1 lead
Drain line
Rubber expansion joint
Rubber expansion joint
Fleck meter
To Next Page
Loading...
