Installer Manual Fleck 2910 - NXT - Installation
42 / 114 Ref. MKT-IM-002 / B - 23.05.2018
5.7. System types
Note
For all multiple tank systems, NBP version valves must be used.
Metered immediate:
The controller monitors the volume of water used. Once it calculates that capacity is exhausted, it
starts regeneration immediately.
Metered delayed:
The controller monitors the volume of water used. Once, at a preset time, it calculates that there is
not enough capacity for the next days of operation, a regeneration cycle will be initiated at a preset
time.
Time clock:
The controller will regenerate based on a set time of operation days at a preset time.
Remote regen start
The controller will get a signal from a separate device to start the regeneration.
To Next Page
Loading...
