Pentair FLECK 2910 NXT - Lower Motor Cams and Micro-Switches Replacement

Installer Manual Fleck 2910 - NXT - Maintenance
Ref. MKT-IM-002 / B - 23.05.2018 85 / 114
9.2.5. Lower motor cams and micro-switches replacement
No. Operation
A
Using a Phillips screwdriver, unscrew (3), extract the micro-switches (2) and protections
(1).
B Using a 6 mm wrench, unscrew (10), remove the washer (9) and the pointer (8).
C Using a pliers, remove the circlip (7) and the arm (6).
D Using a pin hunting, remove the pins (4).
E Put back the cam (5).
F Reverse above procedure steps to rebuild.